| A12-48E12 Rotek Slewing Ring Bearings | da(min):173; Outer Diameter (mm):290; dc(min):-; (Refer.)Mass(kg):15.3; Grease lub.:2100; B1:-; C0r:568; d1:-; Bore Diameter (mm):160; r1 min.:3 mm; Db(max):277; Bearing No.:NF232; rb(max):2.5; B2:-; Basic dynamic load rating (C):427 kN; Weight:14.4 Kg; Cu:71.3; r(min):3; Oil lub.:2500; db(max):-; |
| 3R16-245N1 Rotek Slewing Ring Bearings | shank thread length:1-1/4 in; radial static load capacity:3900 lb; ball material:Steel; d:0.3750 in; lubrication type:With Lubrication Fit; misalignment angle:5 °; shank thread size:3/8-24 in; head width:0.406 in; thread direction:Right Hand; ball width:1/2 in; rod end type:Male Threaded; length to ball center:1.938 in; race material:Bronze; housing material:Steel; head diameter:1 in; |
| M5-38P1 Rotek Slewing Ring Bearings | B:76,2 mm; F:460 mm; Outer Diameter (mm):556; C:76,2 mm; D:584,2 mm; r max:6 mm; Bearing number:170RIJ663; Bore Diameter (mm):431,8; E:556 mm; d:431,8 mm; |
| R9-59N3 Rotek Slewing Ring Bearings | locking device:Eccentric Collar; cage material:Nylon; inner ring width:19.05 mm; B:3/4 in; d:17 mm; bore type:Round; outer ring width:13 mm; snap ring included:Without Snap Ring; series:GRA-RRB; finish/coating:Uncoated; D:40 mm; |
| M5-34P1Z Rotek Slewing Ring Bearings | Housing Coating:Powder Coat; Bearing Family:Setscrew Ball Bearin; Shaft Attachment (2):Set Screw; Bearing Series:210 Series; UPC:782475893218; Seal Type:Shield; Bearing Locking Device:Setscrew; Housing Material:Cast Iron; Self Aligning:Self Centering; Expansion Type:Non-Expansion; Ball Material:Steel; Retainer Type:Max Life Cage; Base to Center Height:Not Applicable; Bearing Inner Ring Material:Steel; |
| H7-43N3A Rotek Slewing Ring Bearings | d:75 mm; ra max:1 mm; nG:3800 1/min / Limitin; d1:88,1 mm; nB:1/min / Reference sp; da min:81 mm; Bearing number:6015-2RSR; Bore Diameter (mm):75; C0r:33500 N / Static loa; m:0,678 kg / Weight; Outer Diameter (mm):115; D2:105,3 mm; Size (mm):75x115x20; rmin:1,1 mm; Da max:109 mm; Width (mm):20; D:115 mm; Cr:42000 N / Dynamic lo; Cur:1960 N / Fatigue lim; B:20 mm; |
| M7-42P1 Rotek Slewing Ring Bearings | Bearing number:B12-53C4; Width (mm):10; D:42 mm; Size (mm):12x42x10; Bore Diameter (mm):12; B:10 mm; Outer Diameter (mm):42; d:12 mm; |
| H7-35N1 Rotek Slewing Ring Bearings | Outer Diameter (mm):200; Width (mm):33; C:33 mm; Size (mm):130x200x33; Angle (α):25 °; D:200 mm; d:130 mm; Bore Diameter (mm):130; B:33 mm; Bearing number:7026UADG/GNP42; |
| A18-89P1 Rotek Slewing Ring Bearings | ring separation:Non-Separable; D:310 mm; number of rows:1; finish/coating:Uncoated; closure type:Open; B:52 mm; bearing material:Chrome Steel; bore type:Straight; series:RU; flanges:(2) Outer; outer ring width:3.54 in; internal clearance:R3; precision rating:Not Rated; d:170 mm; operating temperature range:Maximum of +302; |
| 3R16-102P5 Rotek Slewing Ring Bearings | Outer Diameter (mm):480,000; Width (mm):109,000; d:300,000 mm; Size (mm):300x480x109; Bearing number:29360E; Bore Diameter (mm):300,000; D:480,000 mm; H:109,000 mm; |
| No. | Brand | b | r | P | C | h | M | A | a |
| R9-67N3 | Rotek | - | - | - | 31 mm | - | - | - | - |
| 3R6-49E9 | Rotek | - | - | - | - | - | - | 216 mm | - |
| H8-54N1 | Rotek | - | - | - | - | - | - | - | - |
| 60.20.0544.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| A22-166N1 | Rotek | - | - | - | - | - | - | - | - |
| A12-48E12 | Rotek | - | - | - | - | - | - | - | - |
| S24-178E1 | Rotek | - | - | - | - | - | - | - | - |
| L9-38E9Z | Rotek | - | - | - | 195 mm | - | - | - | - |
| 232.20.0400.503 Type 21/520.2 | Standard 5 | - | - | - | 56 mm | - | - | - | - |
| M5-31P1Z | Rotek | - | - | - | 218 mm | - | - | - | - |
| S14-90E1 | Rotek | - | - | - | - | - | - | - | - |
| S10-63E1 | Rotek | - | 1 | - | 16 mm | - | - | - | - |
| A10-43N28D | Rotek | - | - | - | - | - | - | - | - |
| 3R10-98P9 | Rotek | - | - | - | 20 mm | - | - | - | - |
| L9-46E9Z | Rotek | - | - | - | - | - | - | - | - |
| M5-36P1 | Rotek | - | - | - | - | - | - | - | - |
| A8-41E1 | Rotek | - | - | - | - | - | - | - | - |
| L6-43N9Z | Rotek | - | - | - | - | - | - | - | - |
| 62.20.0450.001.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 232.20.0400.013 Type 21/520.2 | Standard 5 | - | - | - | 27 mm | - | 4,8 mm | - | - |
| 232.20.0500.013 Type 21/650.2 | Standard 5 | - | - | - | 23,52 mm | - | - | - | 8,4 mm |
| 3R8-79P9 | Rotek | - | - | - | 136 mm | - | - | - | - |
| S20-125E1 | Rotek | - | - | - | 110 mm | - | - | - | - |
| 61.20.0560.101.21.1503 | Standard 5 | - | - | - | 8 mm | - | - | - | - |
| 3R13-62N1E | Rotek | - | - | - | - | - | - | - | - |
A8-39E12 Rotek Slewing Ring Bearings Video
Slewing Bearings Manufacturers & Exporters Suppliers
A8-39E12 external gear slewing rings(42.598*34.88*3.23inch) for Tunnel boring machines. Model: A8-39E12. Xuzhou Bangrui International Trade Co.,Ltd (VIP)
A6-11P5 No Gear Slewing Bearings(14.68*8.26*1.57inch) For
Various. A8-39E12 external gear slewing rings(42.598*34.88*3.23inch) for Tunnel boring machines; 1. Good quality and best price 2. Small order accepted 3
Cross-Compatible Slewing Ring Bearing - SlewPro
A8-39E12. 30E.0977.25.000. A13-40E2. 30E.1016.41.000. 2D 3D PDF REQUEST DRAWING. A8-41E1. 30E.1038.25.000. A12-42E3. 30E.1067.38.000
Rotek series slewing ring Luoyang JCB Bearing Technology
42.598. 34.88. 3.23. A8-39E12. 46.640. 36.29. 3.50. A8-41E1. 48.533. 36.75. 4.00. A12-42E3. 55.000. 39.03. 4.75. A18-46E4D. 54.300. 42.00. 4.63. A10-47E1
Rotek Brand Slewing Ring Bearing , Forestry Machinery
... A12-27E3, A8-30E8D, A10-34E6, A12-34E2AG, A14-34E31 A13-38E1, A8-39E12, A8-41E1, A12-42E3, A18-46E4D, A10-47E1, A12-48E12, A14-48E22
Rotek Series 3000 slewing bearing-MANUFACTUTERE OF
A8-39E12, 310, 42.598, 34.88, 3.23. A8-41E1, 456, 46.64, 36.29, 3.5. A12-42E3, 688, 48.533, 36.75, 4. A18-46E4D, 1186, 55, 39.03, 4.75. A10-47E1, 783, 54.3