| 162.20.0560.890.11.1503 Standard 5 Slewing Ring Bearings | Ship Weight:30 LB; Take-Up Frame Style:LIGHT DUTY; Angle Size:2 X 2 X 5/16; Screw Treatment:ZINC PLATED; Screw Diameter:0.7500 in; UPC:782475836987; Material Type:CARBON STEEL; Take-Up Frame Travel:36.0000 in; Frame Size:30; Special Coating:STANDARD PAINT; |
| 3R6-55E9 Rotek Slewing Ring Bearings | Shaft Size (ds) - 130 -0.145 / -0.185:130 0.145 / 0.185; Bearing Type:straight; ID Chamfer Angle (B deg.):45; Housing Bore Dia. (Dh) - 135 +0.040 / -0:135 +0.040 / 0; ID Chamfer Length (Ci):0.600; Bearing Outside Diameter, Nominal(Do):135.000; Shaft Dia., Nominal (d):130.0000; Wall Thickness (S3):2.500; Bearing Bore after Mounting (di) - 135 +0.100 / -0:135 +0.100 / 0; Bore Diameter (mm):130; Material:Wrapped bronze with; |
| R11-75N3 Rotek Slewing Ring Bearings | misalignment angle:7 º; race material:Alloy Steel; harmonization code:8483.30.8070; bearing type:Radial; ball material:Alloy Steel; ball diameter:50 mm; outer ring width:32 mm; radial static load capacity:360000 N; d:45 mm; D:68 mm; lubrication type:PTFE liner; manufacturer catalog:www.aurorabearing.co; Weight:0.427 kg; closure type:Sealed; inner ring width:32 mm; series:GE; outer ring material:Alloy Steel; |
| 3R10-82E3C Rotek Slewing Ring Bearings | C:18 mm; d:40 mm; r:1.1 mm; B:18 mm; Bore Diameter (mm):40; Size (mm):40x80x18; Width (mm):18; Outer Diameter (mm):80; D:80 mm; Bearing number:3NC 7208 FT; |
| L9-38P9Z Rotek Slewing Ring Bearings | Basic static load rating (C0):193 kN; Weight:1,4 Kg; ra max.:1 mm; r1 min.:1,1 mm; Outer Diameter (mm):115; Fatigue load limit (Pu):23,2; da max:88 mm; Da max.:111 mm; Size (mm):75x115x40; Bearing number:C4015-2CS5V/GEM9; da min.:81 mm; Basic dynamic load rating (C):143 kN; D1:104 mm; r2 min.:1,1 mm; D:115 mm; B:40 mm; C:40 mm; Width (mm):40; S2:7,3 mm; Calculation factor (k2):0,063; |
| 61.20.0450.101.21.1503 Standard 5 Slewing Ring Bearings | groove/plug type:None; standards met:83-7-7-3, ASTM B505,; overall length:2-1/4 in; maximum pv value:75000; Weight:0.228 lb; material specification:SAE 660 (C932&#; manufacturer catalog:Click here; maximum p value:4000 psi; D:13/16 in; maximum v value:750 fp/min; operating temperature range:Max 500 ºF; sleeve bearing type:Plain Sleeve; d:1/2 in; bearing material:Cast Bronze C93200 &; |
| L6-33P9ZD Rotek Slewing Ring Bearings | bearing material:AISI 52100 Steel; D:3.3465 in; radial static load capacity:4610 lbf; seal type:Contact; outer ring width:0.7480 in; bore type:Round; manufacturer product page:Click here; series:KH200; d:1.6250 in; locking device:Eccentric Collar; inner ring width:1.7188 in; radial dynamic load capacity:7420 lbf; |
| S8-50E1 Rotek Slewing Ring Bearings | bushing type:Plain; bushing outside diameter:1.0000 in; overall outside diameter:1 in; groove type:Plain Interior; inside diameter:0.7500 in; bushing material:RTFE; |
| 232.20.0500.013 Type 21/650.2 Standard 5 Slewing Ring Bearings | R:3,6 mm; d:53,975 mm; T:36,512 mm; Da:132 mm; a:8,4 mm; B:33,236 mm; Width (mm):36,512; Basic static load rating (C0):234 kN; Outer Diameter (mm):140,03; Aa:6,4 mm; da:77,5 mm; Factor (G2):17,6; Basic dynamic load rating (C90):47,9; Weight:2,75 Kg; Db:117 mm; Factor (G1):71,3; C:23,52 mm; Calculation factor (e):0,87; db:84 mm; Bearing number:78215C/78551; |
| 3R6-55P9 Rotek Slewing Ring Bearings | number of rows:One; drawn cup type:Open Ends; C:20 mm; operating temperature range:-40 to 250 ºF,; Basic static load rating (C0):18,9 kN; Characteristic rolling element frequency, BSF:6.86 Hz; Weight / Kilogram:0.021; Mass:0.02 kg; Min operating temperature, Tmin:-20 °C; Weight:0.0220 Kg; Fw:15 mm; Characteristic outer ring frequency, BPF0:5.57 Hz; lubrication hole type:No Hole; Bore Diameter (mm):15; |
| No. | Brand | b | r | P | C | h | M | A | a |
| R8-35N3 | Rotek | - | - | - | 8,000 mm | - | - | - | - |
| L9-53E9Z | Rotek | - | - | - | 280 mm | - | - | - | - |
| R9-59N3 | Rotek | - | - | - | - | - | - | - | - |
| A22-105E2A | Rotek | - | - | - | - | - | - | - | - |
| R9-55E3 | Rotek | - | - | - | - | - | - | - | - |
| 62.20.0544.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| A22-166N1 | Rotek | - | - | - | - | - | - | - | - |
| A14-48E22 | Rotek | - | - | - | - | - | - | - | - |
| S16-100E1 | Rotek | - | - | - | 15 mm | - | - | - | - |
| 232.20.0400.503 Type 21/520.2 | Standard 5 | - | - | - | 56 mm | - | - | - | - |
| R8-46E3 | Rotek | - | - | - | 48 mm | - | - | - | - |
| A22-98P1 | Rotek | - | - | - | - | - | - | - | - |
| A16-95N6 | Rotek | - | - | - | - | - | - | - | - |
| R9-63N3 | Rotek | - | - | 300 mm | - | - | 243 mm | 65 mm | - |
| A14-47N5A | Rotek | - | - | - | 86 mm | - | - | - | - |
| H7-43N3A | Rotek | - | - | - | - | - | - | - | - |
| L9-42N9Z | Rotek | - | - | - | 41,275 mm | - | - | - | - |
| L9-46P9Z | Rotek | - | - | - | - | - | - | - | - |
| A16-86P1 | Rotek | - | - | - | - | - | - | - | - |
| 3R16-220N1 | Rotek | - | - | - | - | - | - | - | - |
| 162.16.0560.890.11.1503 | Standard 5 | - | - | - | 5,000 mm | - | - | - | - |
| 162.20.0560.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| L9-53N9Z | Rotek | - | - | - | 13 mm | - | - | - | 26 mm |
| R9-63E3 | Rotek | - | - | - | - | - | - | - | - |
62.20.0450.001.21.1503 Standard 5 Slewing Ring Bearings Video
062.20.0450.001.21.1503ROTHE ERAD slewing ring bearing
Luoyang JCB Bearing Technology Co., Ltd is a technical Inc, a specialize in designing and manufacturing slewing ring bearing, we.
061.20.0450.101.21.1503 Slewing Ring Bearings
061.20.0450.101.21.1503 Slewing Ring Bearings ; Type, Ball ; System of Measurement, Metric ; Inside Diameter Of Inner Ring, 369 mm ; Outside Diameter Of Outer Ring ...
062.20.0450.001.21.1503 Rothe erde slewing ring
062.20.0450.001.21.1503 Rothe erde slewing ring ; Model Number: 750 ; Inner Race Width: 0 Inch | 0 Millimete ; Precision Class: ABEC 1 | ISO P0 ; Enclosure: 2 Seals.